My Message
Suggestions
I toke the housings_DIP:DIP-14_W7.62mm footprint.
but every time I open the PCB it makes pin 7 and 14 GND.
while the pin 14 should be VCC.
If I show up the invicable pins in the schematic, then it is labeled correct.
As you can see on the pictures it labels pin 7 & 14 gnd and connects them together
I also have some header pins in the schematic.
VCC and GND should be connect to the headers.
Who is able to help me?
theo_bestenlehner
2017/1/5 10:53:35
Useful!